VOYOR 6-in-1 Blackhead Remover (Model BR510)

VOYOR 6-in-1 Blackhead Remover (Model BR510)

✨ Key Features Summary

· 5 Suction Intensity Levels: Tailor the suction power from low to high to suit your specific skin sensitivity.

· 6 Interchangeable Heads: Targeted shapes designed to reach every contour of your face without blind spots.

· Smart LCD Display: Monitors your active suction level and remaining battery percentage in real time.

· Simple One-Button Control: Easily cycle through power modes or turn off the device with a single click.

��♀️ Step-by-Step Instructions

Step 1: Prep Your Skin

· Wash your face thoroughly with your regular facial cleanser.

· Use a hot towel or face steamer for 10–15 minutes to completely open up your pores.

Step 2: Set Up the Device

· Pick the suction head best suited for your targeted area and snap it into place.

· Ensure the filter sponge is securely fitted inside the filter cup.

Step 3: Test and Operate

· Press the power button once to turn on the device (it will start on Level 1).

· Press the suction head on the back of your hand or palm first to test and select a comfortable strength level.

· Each click increases the intensity level (1 to 5). Clicking past Level 5 will turn the device off.

Step 4: Glide Over Skin

· Keep the suction head moving slowly across your face in a smooth, continuous linear or circular motion.

· Work from your T-zone outwards toward your cheeks.

Step 5: Post-Treatment Care

· Apply an ice towel, cold water, or a pore-minimizing serum to soothe the skin and shrink pores.

⚠️ CRITICAL WARNING
DO NOT keep the suction head on the exact same spot for more than 2 seconds. Leaving it stationary can cause temporary red or purple skin marks. If bruising occurs, rest assured it will disappear naturally within 1 to 5 days.

 

⏱️ Recommended Usage Schedule

Skin Type

Recommended Frequency

Max Duration

Dry Skin

1 session per week

Max 5 minutes

Oily / Combination Skin

2 sessions per week

Max 5 minutes

�� Cleaning & Long-Term Maintenance

· Suction Heads: Detach the head after every use and rinse it directly under warm water. Allow it to air dry fully.

· Main Device Body: NEVER rinse or submerge the device in water. Wipe down dirty areas with a damp cloth instead.

· Filter Sponge: Inspect, clean, and replace the filter sponge and cap regularly to prevent oil clog-ups.

· Storage: Keep the device and accessories in a dry, well-ventilated area out of reach of children.

· Battery Care: If storing the device unused for long periods, fully charge it at least once a year to preserve battery health.


Dejar un comentario

Por favor tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados